Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Slip-cast ceramics: why choose porcelain for your pieces

When a brand looks for a slip-cast ceramics manufacturer, it often compares earthenware, stoneware and porcelain. All can be cast, but they do not give the same piece, nor the same use.

Slip-cast ceramics: why choose porcelain for your pieces

All ceramics can be cast

Slip casting in plaster moulds applies to earthenware, stoneware and porcelain alike: slip is poured, the mould absorbs the water and the piece forms against its walls. What changes is the body, the firing temperature and the result.

Slip-cast earthenware

Fired at a lower temperature, earthenware stays porous under its glaze. It is easy to work and suits décor objects, but chips more quickly and copes less well with intensive use.

Slip-cast stoneware

Stoneware is dense and low in porosity, often coloured throughout, with a rawer look. It suits craft-inspired collections; its walls remain thicker than porcelain's.

Slip-cast porcelain

Fired above 1,300 °C, porcelain vitrifies throughout: it is non-porous, strong and white. It allows thinner walls for the same strength, crisp relief and true colours on a white base.

For food use

Mugs, cups, bowls, jars: a piece in contact with food and the dishwasher benefits from porcelain's non-porosity. Even a chip in the glaze does not let water into the body.

For a brand object

Candle vessel, diffuser, vase, figurine: porcelain brings the finesse, the right weight and the durability premium brands expect.

Cost

Porcelain fires hotter, but its strength and lifespan reduce breakage and returns. Made in Europe, it also avoids the anti-dumping duties that have applied since 2026 to ceramic tableware imported from China.

At Alföld

Our Alföld factory in Hungary slip-casts and decorates porcelain in large runs: mugs, vessels, vases, objects and serving pieces, with decoration and coloured body done on site.

What is the difference between slip-cast ceramics and slip-cast porcelain?

Ceramics is a family: earthenware, stoneware, porcelain. Porcelain is the densest; fired at high temperature, it becomes vitrified and non-porous.

Can large pieces be slip cast?

Yes, depending on the shape. A large piece needs a suitable wall, slow drying and controlled firing; feasibility is confirmed on a prototype.

Information for a quote

Send the drawing or reference piece, the use, volumes and intended decoration. We will tell you whether slip-cast porcelain is the right solution.

Request a quote