Making flatware in France: from model to series
From the stainless steel coil to the mirror polish: what makes good flatware, and how to launch your range in France, as your own design or white label.
The manufacturing steps of a piece of flatware
Stainless steel arrives in coils. The blank is cut, then rolled to give thickness to the bowl and the handle. Trimming cuts the outline and the fork tines. A single press stroke on an engraved die then gives the shape and the pattern: this is stamping.
The edges are then ground with emery, an abrasive belt runs between each tine, and polishing gives the mirror finish. Optionally, the piece is silver or gold plated, then inspected by hand.
What makes good flatware
The right weight, a clean curve, edges soft to the touch, a flawless polish between the tines: each of these qualities comes from a manufacturing step. That is why it is essential to work with a manufacturer who masters the whole chain, from die to polishing.
Own design or white label?
With your own design, you bring a drawing: the manufacturer develops the model, the dies and the manufacturing route. With white label, you start from existing models, customised with your brand by stamping or laser marking. The two approaches can be combined.
Finishes and customisation
Mirror polish or satin, silver or gold plating at 10 or 33 microns, monogram stamped into the die, laser-engraved logo: customisation is built into the series.
Why manufacture in France
A short supply chain, traceability you can visit, direct exchanges with the engineering office and a Made in France argument your customers recognise. In Normandy, the house has made flatware since 1948.
Stainless, silver or gold plated
Mirror-polished 18/10 stainless steel, that is 304, is the most common choice: durable, stainless, easy to care for. Silver and gold plating, at 10 or 33 microns, bring the look of silverware, with a core that remains stainless steel.
Volumes
Our Vire factory produces around two million pieces of flatware a year, on automated lines and polishing carousels. It is sized for very high volume programmes, while also producing finishes and customisation in shorter runs.
How long does it take to launch a pattern?
It mainly depends on tooling: a new pattern needs design, tools and prototypes; a pattern from our archives starts faster.
Can flatware be made in small quantities?
Our flatware is made in series. For small quantities, personalising an existing pattern, for example by engraving, is more suitable than a new design.
What to provide to launch your project
To cost your range, specify the model or design, the references and quantities per piece, the grade, the finish, the customisation, the packaging and your schedule. Our engineering office will reply with a feasibility study and a quote.