Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

How is a fork made? The steps of stainless steel flatware

A fork goes through a dozen operations before it reaches the table. From stainless steel strip to final polish, here is how flatware is made.

How is a fork made? The steps of stainless steel flatware

Blanking

It all starts with a strip of stainless steel. The press cuts a blank from it, a rough flat outline of the future piece.

Rolling

The blank passes between rollers that stretch the metal and distribute its thickness: thicker in the handle for balance, thinner where the tines or the bowl will be formed. This is what gives flatware its weight and feel.

Trimming

A tool then cuts the precise outline of the piece, to its final shape seen from above.

The tines

For a fork, a dedicated tool cuts the gaps between the tines. Their length, spacing and fineness make for comfort at the table.

Stamping

The piece goes under a press, between two engraved dies. Stamping gives it its curve, hollows the spoon bowl, bends the fork and prints the handle's decoration, lines or patterns. It is the step that defines the pattern.

Deburring and polishing

Burrs are removed, edges softened, then the piece is polished, by machine and by hand, to the required finish: mirror or satin.

Knives

The blade is in a different stainless steel, hardened to hold its edge. It is sharpened, plain or serrated, then joined to the handle or forged in one piece. In Vire, blade serration is done on site.

Plating and inspection

Silver- or gold-plated flatware then goes into the plating bath, and is hand-polished on the wheel. Every lot is inspected before packing.

How many tines does a table fork have?

Most often four; some serving or cake forks have three.

Why are the tines rounded?

To pierce without injuring and glide without catching; their finish is checked in series.

In Vire, since 1948

Our Vire factory has been making flatware since 1948: around two million pieces a year, with stamping tools kept for years, even decades, to relaunch patterns from the archives.

Request a quote