Stainless steel and porcelain in contact with food: what the regulations say
Flatware, a bowl or a plate touches food: it must stay inert. Here are the texts that govern stainless steel and porcelain, and the documents to ask your manufacturer for.
The principle: transfer nothing harmful
In Europe, all materials and articles intended to come into contact with food fall under Regulation (EC) No 1935/2004. It sets a general rule: under normal conditions of use, they must not transfer constituents to food in quantities that could endanger health, nor alter its composition, taste or odour.
The same regulation requires traceability at every stage, and Regulation (EC) No 2023/2006 sets good manufacturing practice. Specific texts complete these rules depending on the material.
Stainless steel: the French decree of 1976
There is no European regulation specific to stainless steel. In France, the decree of 13 January 1976 governs stainless steel articles in contact with food. It sets composition criteria, including a minimum chromium content of 13 %, and lists the permitted alloying elements.
Tableware grades easily meet this criterion: 304, or 18/10, and 430, or 18/0, both contain about 18 % chromium.
Release limits for metals
At European level, the Council of Europe publishes a technical guide on metals and alloys in contact with food, whose second edition dates from 2024. It sets a release limit for each element, such as nickel, chromium or manganese, and describes the tests used to check it.
The guide is not a regulation, but it serves as a reference for manufacturers and enforcement authorities alike.
The documents to ask for
For stainless steel, the steelmaker provides a declaration of conformity with the 1976 decree and a certificate of analysis for each heat. The maker of the finished part relies on these documents, on control of its processes and, where needed, on release tests.
Ask your subcontractor for the exact grade, the declaration of conformity and lot traceability: these are the documents your customers or the authorities may ask you for.
Porcelain: lead and cadmium
Ceramic articles fall under a specific European directive, Directive 84/500/EEC. It limits the amount of lead and cadmium a piece may release, with different limits for a flat plate, a hollow vessel or cookware.
Since 2005, every ceramic article intended for food contact must be accompanied by a written declaration of conformity, backed by test results.
Limits are getting stricter
Scientific knowledge has led several countries to lower these limits. The Benelux countries adopted much lower release limits for lead and cadmium at the end of 2024, which the Netherlands has applied since May 2026. For a product sold in several countries, it is wise to aim for the strictest requirements from the outset.
A well-formulated porcelain, glazed and fired at high temperature, releases very little metal. Attention focuses mainly on decoration: colours and gold must be suitable for food contact, taking lip contact into account for rim decorations.
Silver- or gold-plated stainless steel
A silver- or gold-plated stainless steel piece remains subject to the general food-contact rules. In France, the authorities classify these articles as stainless steel with a metallic coating: the stainless steel substrate must comply with the 1976 decree, and the coating itself must be suitable for food contact.
Labelling for consumers
An article sold to consumers must bear the words "for food contact", an indication of its use or the glass-and-fork symbol, unless its food use is obvious, as for flatware or a plate.
For a brand having products made under its own name, these statements and the conformity documents are prepared with the manufacturer from launch.
Is a declaration of compliance needed for each piece?
For items intended for food contact, yes: the manufacturer or importer issues it, backed by tests.
Are decorations on porcelain covered?
Yes: a decoration is part of the tested surface, and each decoration is checked on the finished piece.
A note
This guide sets out the main principles; it does not replace a regulatory analysis of your product and its markets. For the parts we make, we provide the conformity documents for the material and for manufacturing.