Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

What determines the price of a mass-produced porcelain piece

Two mugs that look alike can have very different prices. The cost of a porcelain piece is built step by step, and every design choice weighs on the final price.

What determines the price of a mass-produced porcelain piece

The process

A pressed plate, a jiggered bowl and a slip-cast teapot do not take the same time or labour. Slip casting makes complex shapes possible; the easier a shape is to demould and finish, the less it costs.

Material and weight

Body, glaze and firing energy are paid by weight. A studied thickness lightens the piece without weakening it, and reduces transport cost.

Moulds and development

Model, master mould and production moulds are start-up costs. They weigh heavily on a small run and become negligible over a large volume.

Losses

Every piece that breaks, warps or shows a defect in firing is lost. A shape well designed for its process improves yield, and therefore price.

Decoration

A white piece, an in-glaze colour, a multi-colour decal, a gold line: each decoration adds labour, material and sometimes a firing. Precious metals are the most expensive.

Packaging and transport

Individual or bulk packaging, pieces per carton, distance to the warehouse: these items count, especially for bulky or fragile pieces.

Volumes

Large runs spread fixed costs and allow production to be organised at its best. This is an industrial manufacturer's home ground.

Total landed cost

Comparing factory prices without duties, transport and tied-up stock distorts the calculation. With a 79% anti-dumping duty on Chinese ceramic tableware since February 2026, European manufacturing is often competitive again.

Why are there development costs?

Model, moulds, tooling and decoration trials are paid once, at launch. They are shown separately from the unit price.

Does the price fall with quantity?

Yes: set-up and fixed costs are spread over more pieces.

Information for a quote

Send the drawing or piece, dimensions, decoration, packaging and annual volumes. We also suggest ways to optimise the cost.

Request a quote