Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Custom logo porcelain: mugs, cups and plates in large runs

A logo on a cup or plate travels with the brand at every service. On porcelain, it is fired into the material and lasts as long as the piece.

Custom logo porcelain: mugs, cups and plates in large runs

Decals

The most widely used technique: the logo is printed in ceramic inks, applied by hand on the glazed piece, then fired. Decals reproduce colours, gradients, fine lines and precious metals, on a plate rim or all around a mug.

Relief in the shape

On a slip-cast piece, the logo can be part of the mould: raised or recessed, it shows under the glaze with no added colour. A discreet, permanent branding, reserved for shapes developed for a brand.

Sandblasting

Sandblasting etches a matt pattern into the glossy glaze. The logo can be read by touch and light, with no ink. We offer this rare technique with very low minimum quantities.

Backstamp

Under the piece, the backstamp signs the porcelain with the name of the brand or establishment. It is often the first branding of a private label range.

Gold and platinum

A logo or line in gold or platinum brings a touch of luxury. It needs more care in use and is not microwave safe.

Resistance to washing

Depending on the firing, the decoration stays on the glaze surface or sinks into it. For intensive restaurant use, choose a decoration that withstands professional dishwashers.

Industrial volumes

We brand porcelain in series for brands, chains, hotels and events, on our existing shapes or on shapes developed for you. Every project includes a set-up phase.

A vector file, with colour references, for example Pantone.

Can a logo go on an existing shape?

Yes: a shape from our collections can take your logo, with no mould to create.

Information for a quote

Send the logo as a vector file, colour references, the pieces to brand, the position you want and the quantities.

Request a quote