Making porcelain: isostatic pressing, jiggering or slip casting?
A plate, a bowl and a teapot are not made the same way. Three forming processes, three families of shapes: here is how to choose.
Three processes, three families of shapes
Isostatic pressing forms flat pieces: plates, platters, trays. Jiggering shapes round pieces: bowls, cups, deep plates. Slip casting produces complex shapes: teapots, jugs, pots and pieces in relief.
The choice depends first on the shape, then on volume and the expected level of finish.
Isostatic pressing
Porcelain powder is pressed at very high pressure in a membrane mould. The piece comes out dense, consistent and perfectly flat, ready for firing.
It is the process for plates made in large runs, with a consistency hard to achieve otherwise. We use it in Limoges.
Jiggering
Plastic porcelain clay is placed on a rotating plaster mould; a template, the profile tool, gives it its shape. The process suits all round shapes, from bowls to cups.
Slip casting
Slip, liquid porcelain, is poured into a plaster mould that absorbs the water: a wall forms against the mould. The excess is poured out for a hollow piece, then the piece is released, sponged and fitted with handles and spouts.
Casting allows shapes that are not round, relief and closed hollow pieces. Our Alföld factory in Hungary has made it its speciality, with competitive casting, complex shapes, coloured body and large volumes.
Moulds
Each shape starts from a model, from which a master mould and then plaster production moulds are made. These moulds wear with use and are renewed regularly: a cost to plan for when launching a shape.
After forming
The piece dries, is finished by hand, fired once, glazed, then fired at high temperature. Decoration is then applied and goes through a decoration firing. Our decoration guide details each technique.
How to choose
A plate in a large run calls for isostatic pressing; a bowl, jiggering; a teapot or a pot, slip casting. For a complete collection, processes are combined, between Limoges for excellence and Alföld for complex shapes and volume.
Which process for a mug?
A straight mug can be jiggered; an embossed, faceted or free-form mug is slip cast.
Does the process change quality?
Well controlled, each process gives quality porcelain; it is chosen according to shape and volume.
Information for a quote
Send your drawings or a reference piece, the dimensions, the volumes per shape, the body or glaze colour and the planned decoration. We will advise you on the best process and site.