Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Crazing: why glaze cracks, and why porcelain avoids it

A fine network of cracks sometimes appears in the glaze of a plate or cup. It is called crazing. Sought after as a decorative effect on some pieces, it is a defect on everyday tableware.

Crazing: why glaze cracks, and why porcelain avoids it

What crazing is

Fine cracks in the glaze alone, not running through the piece. They appear when glaze and body do not expand in the same way with heat.

Why it appears

A glaze that contracts more than the body on cooling goes into tension and cracks. Thermal shocks and moisture absorbed by a porous body make it worse over time.

Mainly on earthenware

Porous earthenware absorbs moisture through unglazed areas: it swells slightly and the glaze eventually crazes. The cracks can then stain.

Hard-paste porcelain

Vitrified throughout, hard-paste porcelain absorbs no water, and its glaze is fired with the body at very high temperature. Together they resist crazing.

A deliberate effect

On decorative pieces, a crackle glaze can be wanted. It is kept for objects not used in contact with food.

Can a crazed piece stay in service?

On a food piece, cracks in the glaze can trap dirt: it is withdrawn from service.

Can crazing appear years later?

On earthenware, yes, with moisture; on vitrified hard-paste porcelain, it is very rare.

At inspection

The fit between body and glaze is checked from the first trials, and quality control sets aside any piece with a glaze defect.

Request a quote