Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Writing the specification for a deep drawn stainless steel part

To quote a tool and a drawing sequence, the subcontractor needs precise information. A good specification allows an accurate quote and a start without surprises.

Writing the specification for a deep drawn stainless steel part

The drawing

Dimensioned 2D drawing and 3D file, with functional dimensions marked. A clear drawing separates what is critical from what can adapt to the process.

Grade and thickness

18/10 stainless steel, or 304, or 18/0, or 430, sheet thickness and original surface condition. If the grade is imposed by a standard or by the customer, say so.

Tolerances

Dimensional tolerances, flatness, minimum thickness after drawing, height after trimming: realistic tolerances avoid unnecessarily expensive tooling.

Appearance

Mill finish, satin, brushed or mirror polished, visible and non-visible faces, accepted scratches: appearance determines sheet protection and the polishing sequence.

Additional operations

Cut-outs, holes, flanging, welding of added parts, laser cutting, marking: list everything the part must receive after drawing.

Use

Food contact, washing, heat, corrosive environment: the use justifies the choice of grade and finishes.

Volumes

Annual volumes, batch size, delivery rhythm and expected part life: they determine the type of tool and its amortisation.

Which dimensions should the drawing show?

Functional dimensions, with their tolerance; others can stay indicative to leave room for deep drawing.

Should the steel grade be specified?

Yes, 18/10 or 18/0 stainless steel depending on use. If not, we propose one according to the part and its environment.

Inspection and delivery

Expected inspections, documents to supply, packaging, protection of polished faces: specify them in the specification.

Request a quote