Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Having deep drawn stainless steel parts made: the complete guide

Appliance bowl, container, tray, machine part: many stainless steel objects are born under a press. This guide follows a deep drawing project from start to finish and points, at each step, to the detailed guide.

Having deep drawn stainless steel parts made: the complete guide

1. What is deep drawn

Every hollow part formed from a stainless steel sheet: bowls and vessels, containers, lids, trays, cups, machine parts. Deep drawing forms them in one piece, with no weld.

2. Choosing the grade

18/10 stainless steel suits deep shapes, mirror polish and demanding food contact; 18/0 stainless steel is magnetic and more economical. The grade is chosen according to use.

3. Blank and number of passes

The blank is calculated from the part's surface area. The drawing ratio tells whether the shape is made in one pass or several, with annealing in between if needed.

4. Tooling

Punch, die and blank holder are designed for the part. The tool is a start-up investment, quoted separately and paid back over the volumes.

5. Preventing defects

Wrinkles, tears, earing, springback: most are anticipated at the design stage, through radii, passes and settings, then confirmed in tool trials.

6. Secondary operations

Trimming, laser cutting, drilling, welding, rolled rim: the part takes its final shape. Each operation is set up for series production.

7. Finishes

Satin, brushed or mirror polished, then silver or gold plating depending on the project; pickling and passivation restore the stainless steel's protective layer after the operations.

8. Inspection and compliance

Functional dimensions, appearance and reference parts are set in the specification. Parts in contact with food come with their compliance documents.

9. Volumes

Deep drawing becomes cost-effective when volumes pay for the tool; for small quantities, laser cutting or other processes are more suitable.

What files should be supplied for a quote?

A dimensioned drawing and, if possible, a 3D file, with grade, thickness, expected finish and annual volumes.

What tolerances can be held?

Functional dimensions are set on the drawing and held by the tool and a sizing pass; others can stay indicative.

Can an existing tool be reused?

An existing tool can be assessed after inspection; otherwise, the tool is redesigned from the part or the drawing.

10. Why Vire

At Vire, in Normandy, 53 presses up to 1,000 tonnes, 28 robots, laser cutting, welding, polishing and our toolmakers are brought together in 44,000 m² of workshops.

Request a quote