Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Deep drawn stainless steel bodies for saucepans and cookware

A stainless steel saucepan starts as a metal disc. Deep drawing turns it into a seamless body, consistent from one piece to the next. Cookware brands look for this know-how in Europe.

Deep drawn stainless steel bodies for saucepans and cookware

Drawing the body

The blank is formed in one or more passes depending on depth. Between passes, annealing can restore the metal's ability to deform.

The steel grade

18/10 stainless steel resists corrosion well and polishes easily. 18/0 stainless steel, a ferritic grade, is magnetic: a basis for induction compatibility.

Base and induction

Induction compatibility depends on the grade and on how the base is designed. The base is defined in the specification, with the brand.

Operations after forming

Trimming, rolled or pouring rim, holes for handles, inside and outside polishing: each operation is set up for series production.

Food contact

Parts come with food contact compliance documents.

Does 18/10 stainless steel work on induction?

Not on its own: it is barely magnetic. It needs a ferritic grade or a base designed for induction.

Is a drawn body stronger than a welded one?

With no weld, it has no weakened area and no seam to clean.

At Vire

We work out deep drawn bodies with cookware brands: depth, thickness, grade, finish and volumes.

Request a quote