Deep drawn stainless steel filter bowls and housings
A filter housing is often a deep, even, seamless cup. It is a typical deep drawn part, produced in series for filtration system manufacturers.
The parts
Filter bowls, vessels, lids, bases and rings: cylindrical or shouldered parts of varying depth.
A seamless body
Deep drawing forms the cup in one piece: no longitudinal weld, an even wall and an inner surface that is easy to clean.
Several passes
A deep cup is formed in several passes, with annealing if the deformation requires it; a sizing pass sets the diameter.
Secondary operations
Trimming, rolled rim or flange, holes, laser-cut openings: each operation is set up for the customer's assembly system.
Grade and surface
The grade is chosen according to the fluid and the environment; pickling and passivation restore the stainless steel's protective layer after the operations.
How deep can a drawn cup be?
It depends on the diameter, thickness and grade: a deep cup is formed in several passes, studied case by case.
Can you work to our drawing?
Yes: our design office checks feasibility and, if needed, suggests adjustments for deep drawing.
At Vire
We study these parts to drawing with manufacturers: feasibility, drawing sequence, tooling and volumes.