Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Pickling and passivation of stainless steel: what are they for?

Stainless steel owes its resistance to a thin passive layer. A weld, heating or contamination can weaken it. Pickling, passivation and polishing restore the surface.

Pickling and passivation of stainless steel: what are they for?

The passive layer

The chromium in stainless steel forms a very thin oxide layer in air, which protects the metal and re-forms on its own when scratched, as long as the surface is clean.

What damages it

Around a weld, heated stainless steel discolours and its surface is depleted in chromium. Particles of ordinary steel or tooling residue can also rust on its surface.

Pickling

Pickling removes the heat tint and the oxides formed when hot, to get back to sound metal.

Passivation

Passivation promotes the re-formation of an even passive layer once the surface is clean.

Polishing

Mechanical polishing also removes the affected zone and gives the look wanted, from satin to mirror.

Does passivation change the look?

No: it strengthens the protective layer without changing the visible appearance.

Should parts be passivated after welding?

It is recommended: the heat of welding locally weakens the passive layer.

At Vire

In Vire, welded or heated parts are pickled or polished before delivery, and stainless steel is worked with dedicated tooling to avoid any contamination.

Request a quote