Skip to content
Made in France since 1948 · Vire, Normandy +33 (0)2 31 66 44 00
Guy Degrenne Industrie Request a quote
Guide · Engineering office · 2 min read

Stainless steel finishes: satin, brushed, mirror polish

Satin, brushed, mirror, or both on the same part: how to choose the finish of your stainless steel parts, and how it is achieved.

Stainless steel finishes: satin, brushed, mirror polish

Why the finish matters

The finish gives the part its appearance, but also its feel, its ease of cleaning and its durability. It is therefore chosen for use as much as for looks.

Satin and brushed

Satin finishing gives a matt, silky appearance that softens marks and everyday scratches. On the outside of a part, it is achieved with abrasive belts; on the inside, with rotary brushes. Brushed, more pronounced, leaves a visible directional grain.

Mirror polish

A mirror polish is achieved by successive, ever finer polishing steps, until the surface becomes reflective. It is the finish of tableware, display pieces and luxury objects. 304, known as 18/10, gives the deepest mirror.

Robotic polishing and a consistent finish

On a large series, consistency is essential. In Vire, 12 polishing carousels and robotic arms ensure a consistent finish from one part to the next, completed by hand where needed.

Combining finishes

The same part can combine a satin interior and a mirror exterior, or receive silver or gold plating after polishing. The combination is defined at the design stage, with the engineering office.

Finish and cleaning

A smooth surface is easier to clean and holds less dirt. Mirror polish shows fingerprints more but wipes clean in one stroke; satin hides them better, provided cleaning follows the direction of the grain.

Hand polishing

Some parts need a hand finish: complex shapes, display pieces, or silver and gold-plated pieces, polished on the wheel after plating. This craft gesture completes automatic polishing and gives the final shine.

Can stainless steel be coloured?

We work with polished, brushed or satin stainless steel, and silver or gold plating. We do not offer stainless steel colouring.

Brushed or satin: what is the difference?

Brushed shows fine lines in one direction; satin gives a more uniform matt look. Both are approved on a sample.

How to specify a finish

Mark on the drawing the areas concerned and the expected appearance for each: satin, brushed or mirror, inside and outside. A reference part approved at pre-series then serves as the standard for the whole series.

Request a quote