Why does stainless steel rust? Causes and solutions
Stainless steel does not rust… as long as its protective layer is intact. When it is damaged or contaminated, stains appear. Here is why, and how to prevent it.
The passive layer
Stainless steel contains at least 10.5 % chromium. In contact with air, this chromium forms an invisible oxide film, the passive layer, which protects the metal and reforms by itself if scratched. As long as it can reform, stainless steel does not rust.
Contamination by ordinary steel
Particles of ordinary steel, left by a tool, a wire brush or grinding sparks, rust on the surface of stainless steel and make it look as if it is rusting. In manufacturing, stainless steel is worked with dedicated tools and kept apart from carbon steel.
Chlorides
Salt, bleach and some detergents attack the passive layer and cause pitting. Prolonged soaking in salty or bleached water is stainless steel's enemy.
Confined areas and standing water
Where water is trapped, in a corner, under a seal or between two tight parts, there is not enough oxygen to reform the passive layer. A design without crevices and quick drying prevent these stains.
Welding and heat
Around a weld, heated stainless steel discolours and loses some of its protection. Pickling, passivation or polishing restores its properties.
Choosing the grade
304, or 18/10, resists corrosion better than 430, or 18/0. For use exposed to moisture and intensive washing, 304 is the safest choice.
Recovering stained stainless steel
A surface stain comes off with a non-abrasive stainless steel cleaner, rubbed in the direction of the satin finish, then rinsed and dried. After cleaning, the passive layer reforms on its own in air.
Can new flatware rust?
Spots can appear if it was contaminated by ordinary steel or left wet; they can generally be removed.
Does the dishwasher make stainless steel rust?
Too much salt or standing water can encourage spots; correct dosing and drying prevent them.
At our factory
In Vire, stainless steel is worked with dedicated tooling, and welded or heated parts are pickled or polished. The material certificate guarantees the grade of each lot.