Polishing stainless steel in series: robots, machines and hand finishing
A perfect mirror finish on one part is craftsmanship. The same on a hundred thousand parts is a method: written sequences, robots, machines and inspection.
Polishing means removing less and less material
Polishing runs through finer and finer abrasives. Each step removes the scratches of the previous one, down to the cloth mops and compounds that give the final shine.
Skipping a step leaves scratches that show under light: consistency comes from respecting every pass.
The polishing sequence
For each part, a sequence is defined: abrasives, tools, speeds, pressure and time for each step. Written down and followed like a recipe, it guarantees the same result from one run to the next.
Robots
A robot arm presents the part to belts and mops with the same pressure and the same angle on every pass. It suits repetitive shapes and large volumes, such as vessels, bowls and technical parts.
Each part has its own program, developed once and reused for every run.
Automatic machines
Dedicated machines and carousels move parts past several polishing heads. They are particularly suited to flatware and small parts produced in very large runs.
The polisher's hand
Hard-to-reach areas, touch-ups and exceptional pieces go through the hands of our polishers. After silver or gold plating, each piece is hand-polished on the wheel, then inspected by eye under light.
Before and after plating
A part to be silver- or gold-plated is polished before plating, because the precious metal faithfully reproduces the surface: a scratch under the silver stays visible. It is hand-polished again after plating, for depth of shine.
Mirror, satin or brushed
The same logic of sequences applies to every finish: mirror polish, soft satin and evenly lined brushed finishes. Our guide to stainless steel finishes explains their differences and uses.
Appearance inspection
Appearance criteria are defined with the customer: visible areas, acceptable scratches, pits and reflections, with reference parts. They are then checked on every lot.
Mirror or satin: which shows marks less?
Satin hides micro-scratches and fingerprints better; mirror polish is brighter but shows marks more.
Is polishing automated?
Largely: automatic polishing machines and robots, with hand finishing for the most demanding pieces.
Information for a quote
Tell us the part, the grade, the finish required for each area, the annual volumes and, if you have one, a reference part for appearance.