Prototyping a porcelain piece: from 3D file to the first fired pieces
Before launching a series, you need to hold the piece in your hand. The prototype checks shape, weight, firing behaviour and decoration, on real porcelain.
From drawing to 3D file
The engineering office starts from your drawing, a sketch or a 3D file. It checks that the shape can be made: wall thickness, draft angles, handles, spouts, fragile areas.
Compensating for shrinkage
Porcelain shrinks significantly between the mould and the kiln. The model is therefore scaled up by this shrinkage so the fired piece has the right dimensions.
Printed or sculpted model
The model can be 3D printed, which speeds up iterations and guarantees fidelity to the file, or sculpted by hand for very organic shapes. It is then finished by hand.
The prototype mould
A plaster mould is taken from the model to cast or press the first pieces. They then follow the same route as production: drying, firing, glazing, decoration.
What is checked
Dimensions and capacity, weight, handling, firing behaviour, glaze appearance, decoration rendering, compatibility with accessories or packaging: each point is approved with you.
Iterating
A prototype often reveals a detail to correct: a handle to thicken, a neck to rework, a relief to soften. The model is adjusted and a new run is made if needed.
From prototypes to reference pieces
Approved prototypes become the reference pieces for production: the series is compared with these samples.
How much does a prototype cost?
It depends on the shape and the method: 3D printing, prototype mould or cast piece. The cost is given in the quotation.
Can a 3D-printed prototype go in the dishwasher?
No: it is used to approve shape and handling. Use tests are done on fired porcelain pieces.
Information for a quote
Send the drawing or 3D file, dimensions, material, intended decoration, the number of prototypes you need and your schedule.